Momo9 bricked!please help!

[Allexxx11]

Hello there!I bought a new Ployer MOMO9 and i wanted to upgrade to ICS,but i stuck at the part with livesuite,please help,i did about 100 times like in the tutorial on the internet,one time it recognized well,it stucked at 2% and i thaught that something wasn't ok because the bar didn't grow more than 2%,and i pressed exit,and from there the tablet won't power again on android 2.3,please help,i don't know what to do!

[hariprasadiit]

download livesuit form here if you dont have it.
now download official momo9 firmware then follow below steps.

1. power off the device
2. Press and hold any physical key except the power key on the device(ie, press and hold Vol+ key, still holding in 3 and 4)
3. Press and hold power key for about 2s(power on the device, when powering on, if a key is pressed, the devices will not boot until key released or 4)
4. Release power key and press power key 3 times(i usually just keep pressing the power key)
5.open livesuit and click on selectImg,then select the downloaded firmware which is in zip file.
6.now click on synsupdate.this should unbrick your device.


If you pc are prompted finding new hardware, install the driver in the livesuite program UsbDriver folder.
livesuite wil ask do you want to format or not, choose yes. Then it will ask you to confirm, choose yes. It will start to download the image and flashing the nand.

SOURCE : Hack A10 devices - eLinux.org

hit thanks if i helped you

[hariprasadiit]

first try charging it or connecting to pc via usb, then try to power on.if it doesnt work then we have to look into the issue.

[Allexxx11]

download livesuit form here if you dont have it.
now download official momo9 firmware then follow below steps.

1. power off the device
2. Press and hold any physical key except the power key on the device(ie, press and hold Vol+ key, still holding in 3 and 4)
3. Press and hold power key for about 2s(power on the device, when powering on, if a key is pressed, the devices will not boot until key released or 4)
4. Release power key and press power key 3 times(i usually just keep pressing the power key)
5.open livesuit and click on selectImg,then select the downloaded firmware which is in zip file.
6.now click on synsupdate.this should unbrick your device.


If you pc are prompted finding new hardware, install the driver in the livesuite program UsbDriver folder.
livesuite wil ask do you want to format or not, choose yes. Then it will ask you to confirm, choose yes. It will start to download the image and flashing the nand.

SOURCE : Hack A10 devices - eLinux.org

hit thanks if i helped you

i have a new problem...i repaired the tablet at an service..but...it worked for 2 days..and today restarted and won't go more than the boot logo...it's not working anymore...it's stuck in boot logo...what can i do?!i am desperate..i don't know how to flash firmware..my pc just don't recognize it...i have win7 x64...and another pc with xp sp3,and it's not working on both..not recognizing in livesuit...it just starts and it remains at the loading part..and then..nothing...please help!...if i go to device manager i see "usb device(vid_....)" with yellow " ! "..what can i do?